FM-200 and Ecaro-25 fire suppression systems extinguish a fire quickly by discharging in 10 seconds or less! The system removes heat and breaks up the fire at the molecular level. These agents both discharge a gas that leaves NO residue, NO water damage, and will not require costly clean-up. Get your equipment back up and running in minutes instead of days!
The system is controlled by a U.L. listed releasing control panel, which starts a 30 second count down delay after 2 smoke detectors are activated. After the 30 second count down is completed, agent is released into the room through discharge nozzles.
Carbon dioxide or CO2 is a colorless, odorless, electronically non-conductive gas, that’s highly efficient as a fire suppression agent. When applied to a fire, CO2 provides a heavy blanket of gas that reduces the oxygen level to a point where combustion cannot occur. Since carbon dioxide is a gas, there is no cleanup associated with a CO2 fire suppression system discharge…that’s minimal interruption to your business!
Carbon dioxide fire suppression systems are extremely versatile, effective on a wide range of flammable and combustible materials and approved for Class A, B and C hazards. These systems are available for use in total flooding or local fire protection applications, making it an effective fire protection system for a wide variety of hazards.
Inert gas fire suppression systems are the safe, natural way to extinguish a fire. Designed for a superior long distance delivery. Inert storage containers and selector valves enable you to protect several rooms with one bank of containers stored far from the protected areas.
An inert fire suppression system is designed to reduce the oxygen concentration inside the protected hazard until it reaches a level where combustion is no longer supported. ProInert and Aragonite systems use IG-55, a blend of environmentally inert, all natural Argon and Nitrogen gases.
Ready to get started?